This HTML5 document contains 156 embedded RDF statements represented using HTML+Microdata notation.

The embedded RDF content will be recognized by any processor of HTML5 Microdata.

Subject Item

dbr:Surface_roughness

rdf:type

owl:Thing

dbo:thumbnail

n27:300

owl:sameAs

n5: dbpedia-it:Rugosità n13:Q114817 n14: n17: dbpedia-pl:Chropowatość_powierzchni dbpedia-fr:État_de_surface dbpedia-de:Rauheit n26:0ch26cd dbpedia-wikidata:Q114817

foaf:isPrimaryTopicOf

wikipedia-en:Surface_roughness

rdfs:comment

Surface roughness often shortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Surface roughness often Vikas Nauriyalshortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Surface roughness oftenshortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose.

rdfs:label

Surface roughness

dbo:abstract

Surface roughness often shortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Roughness plays an important role in determining how a real object will interact with its environment. In tribology, rough surfaces usually wear more quickly and have higher friction coefficients than smooth surfaces. Roughness is often a good predictor of the performance of a mechanical component, since irregularities on the surface may form nucleation sites for cracks or corrosion. On the other hand, roughness may promote adhesion. Generally speaking, rather than scale specific descriptors, cross-scale descriptors such as surface fractality provide more meaningful predictions of mechanical interactions at surfaces including contact stiffness and static friction. Although a high roughness value is often undesirable, it can be difficult and expensive to control in manufacturing. For example, it is difficult and expensive to control surface roughness of fused deposition modelling (FDM) manufactured parts. Decreasing the roughness of a surface usually increases its manufacturing cost. This often results in a trade-off between the manufacturing cost of a component and its performance in application. Roughness can be measured by manual comparison against a "surface roughness comparator" (a sample of known surface roughness), but more generally a surface profile measurement is made with a profilometer. These can be of the contact variety (typically a diamond stylus) or optical (e.g.: a white light interferometer or laser scanning confocal microscope). However, controlled roughness can often be desirable. For example, a gloss surface can be too shiny to the eye and too slippery to the finger (a touchpad is a good example) so a controlled roughness is required. This is a case where both amplitude and frequency are very important. Surface roughness oftenshortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Roughness plays an important role in determining how a real object will interact with its environment. In tribology, rough surfaces usually wear more quickly and have higher friction coefficients than smooth surfaces. Roughness is often a good predictor of the performance of a mechanical component, since irregularities on the surface may form nucleation sites for cracks or corrosion. On the other hand, roughness may promote adhesion. Generally speaking, rather than scale specific descriptors, cross-scale descriptors such as surface fractality provide more meaningful predictions of mechanical interactions at surfaces including contact stiffness and static friction. Although a high roughness value is often undesirable, it can be difficult and expensive to control in manufacturing. For example, it is difficult and expensive to control surface roughness of fused deposition modelling (FDM) manufactured parts. Decreasing the roughness of a surface usually increases its manufacturing cost. This often results in a trade-off between the manufacturing cost of a component and its performance in application. Roughness can be measured by manual comparison against a "surface roughness comparator" (a sample of known surface roughness), but more generally a surface profile measurement is made with a profilometer. These can be of the contact variety (typically a diamond stylus) or optical (e.g.: a white light interferometer or laser scanning confocal microscope). However, controlled roughness can often be desirable. For example, a gloss surface can be too shiny to the eye and too slippery to the finger (a touchpad is a good example) so a controlled roughness is required. This is a case where both amplitude and frequency are very important. Surface roughness often Vikas Nauriyalshortened to roughness, is a component of surface texture. It is quantified by the deviations in the direction of the normal vector of a real surface from its ideal form. If these deviations are large, the surface is rough; if they are small, the surface is smooth. In surface metrology, roughness is typically considered to be the high-frequency, short-wavelength component of a measured surface. However, in practice it is often necessary to know both the amplitude and frequency to ensure that a surface is fit for a purpose. Roughness plays an important role in determining how a real object will interact with its environment. In tribology, rough surfaces usually wear more quickly and have higher friction coefficients than smooth surfaces. Roughness is often a good predictor of the performance of a mechanical component, since irregularities on the surface may form nucleation sites for cracks or corrosion. On the other hand, roughness may promote adhesion. Generally speaking, rather than scale specific descriptors, cross-scale descriptors such as surface fractality provide more meaningful predictions of mechanical interactions at surfaces including contact stiffness and static friction. Although a high roughness value is often undesirable, it can be difficult and expensive to control in manufacturing. For example, it is difficult and expensive to control surface roughness of fused deposition modelling (FDM) manufactured parts. Decreasing the roughness of a surface usually increases its manufacturing cost. This often results in a trade-off between the manufacturing cost of a component and its performance in application. Roughness can be measured by manual comparison against a "surface roughness comparator" (a sample of known surface roughness), but more generally a surface profile measurement is made with a profilometer. These can be of the contact variety (typically a diamond stylus) or optical (e.g.: a white light interferometer or laser scanning confocal microscope). However, controlled roughness can often be desirable. For example, a gloss surface can be too shiny to the eye and too slippery to the finger (a touchpad is a good example) so a controlled roughness is required. This is a case where both amplitude and frequency are very important.

dbo:wikiPageEditLink

n29:edit

dbo:wikiPageExternalLink

n19:html n21:htm n24:html n25:html n28:html

dbo:wikiPageExtracted

2021-01-20T15:31:53Z 2021-03-12T19:09:52Z 2021-04-07T03:24:44Z 2021-03-18T11:28:45Z 2020-12-16T13:28:10Z 2020-10-15T03:25:07Z 2020-07-31T20:25:55Z 2020-05-22T14:54:14Z 2020-08-07T16:39:13Z 2021-01-15T07:56:04Z 2021-02-19T17:36:11Z 2020-10-15T03:37:32Z 2020-09-16T11:36:05Z 2020-12-04T12:45:00Z 2021-03-18T11:25:28Z 2020-08-07T16:49:05Z 2020-10-15T03:30:46Z 2021-03-18T11:26:29Z 2020-07-21T05:02:18Z 2021-03-01T09:22:25Z 2020-04-11T10:47:08Z 2020-08-07T16:10:23Z 2020-06-23T12:08:58Z

dbo:wikiPageHistoryLink

n29:history

dbo:wikiPageID

2260140

dbo:wikiPageLength

22549 22330 22494 21976 22500 22448 22449 22156 21805 21772 21763 22260 22261 22472 22476 21754 21747 22485

dbo:wikiPageModified

2021-03-12T19:09:46Z 2020-06-23T12:08:55Z 2020-04-11T10:47:02Z 2021-03-18T11:28:40Z 2020-07-31T20:25:51Z 2020-12-16T13:28:04Z 2020-10-15T03:37:26Z 2021-01-20T15:31:48Z 2020-07-21T05:02:13Z 2020-08-07T16:49:02Z 2021-02-19T17:36:05Z 2021-01-15T07:55:59Z 2020-05-22T14:54:11Z 2021-03-18T11:25:20Z 2020-10-15T03:30:41Z 2021-03-01T09:22:20Z 2021-03-18T11:26:24Z 2020-09-16T11:36:00Z 2021-04-07T03:24:38Z 2020-10-15T03:25:02Z 2020-08-07T16:10:20Z 2020-08-07T16:39:08Z 2020-12-04T12:44:56Z

dbo:wikiPageOutDegree

48 50 51

dbo:wikiPageRevisionID

1016428117 971684210 950306345 978689738 964069207 983593487 1000477642 983592258 1012798575 1012798695 983592865 971688739 970524970 1009586394 992275936 1001630011 1011773167 1007735401 958216728 968732062 971690284 1012798941 994580548

dbo:wikiPageRevisionLink

n11:983593487 n11:1012798695 n11:1007735401 n11:968732062 n11:983592258 n11:1000477642 n11:978689738 n11:971690284 n11:950306345 n11:958216728 n11:994580548 n11:1009586394 n11:1001630011 n11:1011773167 n11:1012798941 n11:971684210 n11:983592865 n11:971688739 n11:970524970 n11:992275936 n11:964069207 n11:1012798575 n11:1016428117

dbp:wikiPageUsesTemplate

dbt:Wiktionary dbt:Refimprove dbt:Reflist dbt:Abbr dbt:Commons_category dbt:Authority_control dbt:Short_description n22: dbt:Further dbt:More_citations_needed dbt:ISBN

dct:subject

dbc:Metalworking_terminology dbc:Tribology dbc:Mechanical_engineering

foaf:depiction

n31:png